Parts Name
No.
1 Heater case
2 Angle
3 Connector (lower)
4 Heater case base
5 Pully B (for 5 ribs Belt)
6 Motor washer A
7 U-ring
8 Lock washer
9 Nut
10 Belt (5 ribs/wide type)
Note:
Belt, Pully B and Pully A(with motor) of this model use a wide type to improve the durability of
the belt. / There is no interchangeability mutual with parts of the previous models. / Please note
that never making a mistake in the use of eachpart, when exchange parts.
2.11. Heater case base
1. Belt and Pully B are detached beforehand.
Assembly instruction: / The position of each Set Mark must be
matched.
2. Remove the four screws which secure the heater case base, and
remove the heater case base. (Fig.19)
Fig.19
17