Connecting via the AUX-in jack
NOTE: Music playback via the AUX-in jack 1 has a
higher priority over a Bluetooth® connection .
Once the AUX cable 13 is plugged into the AUX-in
jack 1 , the Bluetooth® wireless connection will be
disconnected . Music playback is now switched to AUX-in
only and the LED 2 lights up green .
If the product is off, press and hold the
until the signal LED 2 lights up green and a signal tone
sequence sounds .
Switch the playback device on and start playback .
Adjust the volume on the playback device to the highest
possible volume then adjust the volume on the product
using the
Switching between AUX-in
and Bluetooth
To resume music playback via Bluetooth® connection
unplug the AUX cable 13 from the AUX-in jack 1 .
30
US-EN
7
and
buttons .
9
connections
®
button 8