Connecting Via The Aux-In Jack - Silvercrest SBL TW3 A1 Operation And Safety Notes

˜ Connecting via the AUX-in
jack
NOTE: Music playback via the AUX-in
jack 1 has a higher priority over a Bluetooth
connection .
Once the AUX cable 13 is plugged into
the AUX-in jack 1 , the Bluetooth
connection will be disconnected . Music
playback is now switched to AUX-in only
and the LED 2 lights up green .
If the product is off, press and hold the
button 8 until the signal LED 2 lights up
green and a signal tone sequence sounds .
Switch the playback device on and start
playback .
Adjust the volume on the playback device to
the highest possible volume then adjust the
®
wireless
®
GB/IE 71