Epson UB-P500 User Manual

Introduction
The UB-P500 is a dedicated interface board for Epson EU-T482 series.
This manual provides instructions, including a simple setup for operators to
use the interface board safely and correctly.
Important Safety Information
Key to Symbols
The symbols in this manual are identified by their level of importance, as
defined below. Read the following carefully before handling the product.
CAUTION:
Cautions must be observed to avoid minor injury to yourself, damage to
your equipment, or loss of data.
Note:
Notes have important information and useful tips on the operation of your equipment.
Safety Precautions
CAUTION:
Do not install the UB-P500 into other printers than the Epson EU-T482
series.
The printers may not work properly.
Be sure to make the printer setting appropriately for each interface.
Disconnect the power supply from the printer before you remove the
interface board. The electrical current is flowing in some parts of the
printer circuit even when the power switch is turned off. The interface
board and printer may become damaged if you install the interface
board with the power supply connected to the printer.
Wear a grounded wrist strap when handling the interface board to
prevent damage from static electricity.
To avoid contamination, do not touch the board connector.
Unpacking
The following items are included. If any item is damaged, contact your dealer.
❏
UB-P500
❏
User's Manual (this manual)
User's Manual
Copyright © Seiko Epson Corporation 2012
1
Printed in China