Table of Contents
Advertisement
English
Re-Pair Timer
Description
Options
Infinite (For all
This Timer only applies to the acces-
Bluetooth de-
sory. The programmable timer
vices)
choices are: 0–15 minutes, 2 hours,
4 hours, or 8 hours.
Do note there are exceptions for Op-
eration Critical Wireless (OCW)
headset and PTT which are preprog-
rammed to 8 hours.
This timer is a "stay alive" timer
where the accessory remains on
without the device reconnecting be-
fore powering off. The radio remains
on until the user powers off the ra-
dio. The radio and accessory re-
mains paired indefinitely. Once the
device re-connect, the timer is reset.
The radio could not control the Drop Timer of Personal
Area Networking (PAN), Dial-Up Networking (DUN),
Commercial Off- The-Shelf (COTS), and data services. It
depends on the specifications of these external devices.
Check with your dealer or system administrator for more
information about these timers.
164
To establish the Bluetooth Connection, see
Low Frequency-Motorola Proximity Pairing (LF-MPP)
Feature on page 164
or
Standard Pairing Feature on page
166.
Pairing with Low Frequency-Motorola
Proximity Pairing (LF-MPP) Feature
Ensure that Bluetooth feature of your radio is on and the
Bluetooth tones are enabled.
Bluetooth tones, Bluetooth menu and preprogrammed
buttons must be preprogrammed by a qualified radio
technician. Check with your dealer or system administrator
for more information.
The range of Bluetooth operation when using a MCW
accessory is 10 meters line-of-sight communication. This is
an unobstructed path between the location of the signal
transmitter (your radio) and the location of the receiver
(your device or accessory).
Obstacles that can cause an obstruction in the line-of-sight
include trees, buildings, mountains, cars, and others.
For high degree of reliability, Motorola Solutions
recommends to NOT separate the radio and the accessory.
Pairing with
Advertisement
Table of Contents
