Table of Contents
Advertisement
Quick Links
VER:1.1 │
│ 28.04.2017
ABB-Welcome
Pos: 2 /DinA4 - Anl eitun gen Online /Inh alt/KNX/Doo rEntry /832 20-AP- xxx/Tit elblat t - 832 20-AP-xxx - ABB @ 1 9\m od_ 132 3249 806 476 _15. docx @ 11 108 4 @ @ 1
DP7-S-611
DP7-S-625
7" Video hands-free indoor
station with free@home
function
=== E nde der Liste für Tex tma rke C over == =
Advertisement
Table of Contents
Related Manuals for ABB DP7-S-611
Summary of Contents for ABB DP7-S-611
- Page 1 ABB-Welcome Pos: 2 /DinA4 - Anl eitun gen Online /Inh alt/KNX/Doo rEntry /832 20-AP- xxx/Tit elblat t - 832 20-AP-xxx - ABB @ 1 9\m od_ 132 3249 806 476 _15. docx @ 11 108 4 @ @ 1 DP7-S-611 DP7-S-625 7"...
-
Page 2: Table Of Contents
Operation ....................4 Standard operations ..............11 5.1.1 Control elements ..............11 5.1.2 Welcome screen and status bar ..........13 5.1.3 DES functions in ABB-free@home system ....... 15 5.1.4 free@home ................16 Control actions ................ 17 5.2.1 Surveillance ................17 5.2.2 Intercom ................. - Page 3 ABB-Welcome 5.2.12.6 Voice Message ............... 43 5.2.12.7 Setting Door Open Password ..........45 5.2.12.8 Black list ................. 46 5.2.12.9 Audio Settings ................. 47 5.2.12.10 Auto Unlock ................49 5.2.12.11 Display Settings ..............51 5.2.12.12 Date and Time ................ 53 5.2.12.13 Camera List ................55 5.2.12.14 Language ................
- Page 4 Busch-Jaeger or visit our Internet site at: www.BUSCH-JAEGER.com www.abb.com/freeathome Note... Detailed information for planning ABB-W elcome systems and ABB- free@home systems is contained in the system manuals. Download at www.Busch-Jaeger.com or www.abb.com/freeathome Pos: 8 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Bestimmungsgemäßer Gebrauch @ 18\mod_1302763321316_15.docx @ 103483 @ 1 @ 1...
- Page 5 The ABB-free@homeTouch 7" (DP7-S-6xx) is an integral part of the ABB Welcome door communication system and operates exclusively with components from this system, can be used as control panel in ABB- free@home system (should be configured via SysAP beforehand). The device is intended for the following: »...
- Page 6 ABB-Welcome Improper use Each use not listed in chapter 2.2 is deemed contrary to intended use and can lead to the injury of persons and damage to property. Busch-Jaeger is not liable for damages caused by use deemed contrary to the intended use of the device.
- Page 7 ABB-Welcome specialist staff. » Never use the device with damaged connecting cables. » Do not open covers firmly bolted to the housing of the device. » Use the device only in a technically faultless state. » Do not make changes to or perform repairs on the device, on its components or its accessories.
-
Page 8: Product Description
This, for example, makes it possible to switch an actuator in the free@home system during an incoming door call of the ABB-W elcome system, or to use a sensor in the free@home system to send an "Open door" command to the ABB- W elcome system. -
Page 9: Scope Of Supply
The scope of supply only contains the panel. The bus can be connected via enclosed terminal block. Type overview Article no. Product name Colour Display diagonal ® DP7-S-611 ABB-free@home Touch 7" white 17.8 cm (7“) ® DP7-S-625 ABB-free@home Touch 7"... - Page 10 Name: Door opener Type: Actuator Made available by: free@homeTouch 7“ Function: Actuates the door opener of the ABB W elcome system (Application: a free@home sensor is to actuate the door opener) Name: Door call Type: Sensor Made available by: free@homeTouch 7“...
-
Page 11: Operation
ABB-Welcome Operation Pos: 19 /Di nA4 - A nleitu ngen Onlin e/Ueb ersc hrift en/2 ./Nor male r Bet rieb @ 18 \mo d_1 302 768 8209 65_ 15. docx @ 10 3540 @ 2 @ 1 Standard operations Pos: 20 /Di nA4 - A nleitu ngen Onlin e/Ueb ersc hrift en/3 ./Bedie nele men te @ 20\ mod _13 232 6022 055 9_1 5.do cx @ 1 116 47 @ 3 @ 1 5.1.1... - Page 12 ABB-Welcome Functions 7"Touch screen Comunication button 2A While a call is coming, press this button to activate the communication within 30 seconds and press it again to end the call. 2B In standby mode, press this button to set up the voice and video connections to the default outdoor station.
-
Page 13: Welcome Screen And Status Bar
ABB-Welcome 5.1.2 Welcome screen and status bar Fig. 3 Status bar During the calling period, the following functions are available: Functions Current date - Touch this button to set the current date.. Time - Touch this button to set the correct time . - Page 14 ABB-Welcome - The "Open door" icon is displayed when you press the door opener or activate the function "Autom atic door opener". SD card - The icon shows whether you have inserted an SD card. Switch actuator - The icon is shown after you activate the switch actuator.
-
Page 15: Des Functions In Abb-Free@Home System
ABB-Welcome 5.1.3 Door communication system functions in ABB-free@home system Pos: 21 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/Be dienel eme nte - 8 322 0-AP-xxx @ 18\ mo d_1 3032 128 536 05_ 15.d ocx @ 103 673 @ @ 1 Fig. -
Page 16: Free@Home
ABB-Welcome 5.1.4 free@home Fig. 5 Hom e autom ation When activating the function, the controlframes for home automation will be shown on the welcome screen. Function Light switch Switch on/off. Timed on duration. Force-position on/off Dimmer control Light dimmer control (One step forward and one step backward). -
Page 17: Control Actions
ABB-Welcome Pos: 26 /Di nA4 - A nleitu ngen Onlin e/Ueb ersc hrift en/2 ./Bedie nakti onen @ 2 0\m od_ 1323 262 294 281 _15. docx @ 11 191 1 @ 2 @ 1 Control actions Pos: 27 /Di nA4 - A nleitu ngen Onlin e/Ueb ersc hrift en/3 ./Spr ech- und Videov erbi ndu ng @ 20\ mod _13 232 6236 870 0_1 5.do cx @ 1119 27 @ 3 @ 1 5.2.1... -
Page 18: Intercom
ABB-Welcome Pos: 30 /Di nA4 - A nleitu ngen Onlin e/Ueb ersc hrift en/3 ./T uer oeff nen @ 2 0\mo d_1 323 263 277 453 _15. docx @ 11 193 5 @ 3 @ 1 5.2.2 Intercom Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1 Intercom Fig. -
Page 19: Calling Guard Unit
ABB-Welcome 5.2.3 Calling Guard unit Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1 Call Guard unit Fig. -
Page 20: Switch Actuator
ABB-Welcome 5.2.4 Switch Actuator Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1 Switch Actuator Fig. -
Page 21: Setting Up The Voice And Video Connections
ABB-Welcome 5.2.5 Setting up the voice and video connections Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1 Fig. -
Page 22: Opening The Door
ABB-Welcome 5.2.6 Opening the door Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1 Fig. -
Page 23: Muting
ABB-Welcome 5.2.7 Muting Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1 Fig. -
Page 24: Activating The Custom Function
ABB-Welcome 5.2.8 Activating the custom function Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1... - Page 25 ABB-Welcome Fig. 13 Activating custom function The program button can be configured with different functions , e.g. call to guard unit, intercom call or control switch actuator. And its default function is the release of the 2nd-lock, which is connected with terminals COM-NC-NO of an outdoor station.
-
Page 26: Events And Picture Memory / History
ABB-Welcome 5.2.9 Events and picture memory / history Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1 Fig. - Page 27 ABB-Welcome — 27 —...
- Page 28 ABB-Welcome Fig. 15 Events and picture storage / history During a call, you can take a snapshot at any time by pressing the "History" button, events and even when the "Automatic snapshots" function is not activated. The pictures memory / history menu has the following functions.
- Page 29 ABB-Welcome If you have activated the system setting menu "Automatic snapshots", a mini window will be displayed in the events list after an incoming call is missed. - Date, time and the type of the event are recorded together with the snapshot.
-
Page 30: Information
ABB-Welcome 5.2.10 Information Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1 Fig. -
Page 31: Inserting The Sd Card
ABB-Welcome 5.2.11 Inserting the SD card Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1 Fig. -
Page 32: Settings
ABB-Welcome 5.2.12 Settings Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1 5.2.12.1 Overview... - Page 33 ABB-Welcome BlackList - Set the blacklist, which is used to prevent unwanted calls from other apartment(s) Audio Settings - Set the ringtone for the outdoor stations, the doorbell and others; - Set the volume for the ringtone Auto Unlock - Set the automatic unlock time range.
- Page 34 ABB-Welcome Fig. 19 Overview of settings To turn to the setting areas of the list field (1), carry out the following steps: Function To display the hidden functions, click on the scroll buttons (2). Touch one of the setting areas.
-
Page 35: Intercom
ABB-Welcome 5.2.12.2 Intercom Fig. 20 Intercom The “Intercom” menu has the following functions. Functions The name of an intercom. The address of an intercom. The type of an intercom. means an external intercom from different apartments. To make an external intercom, each apartment must have a master indoor station. - Page 36 ABB-Welcome Pressing “Add” or “Adjust” Fig. 21 Intercom The “Intercom” has the following functions: Functions - Click on the name box so you can edit the name. - Change the call type through the fold-down menu. — 36 —...
- Page 37 ABB-Welcome *External intercom” means a call from different apartments *Internal intercom” means a call from the same apartment - Edit the address via the numeric keyboard, from 001 to 250. *If the call is an internal intercom, there is no need to set the target address.
-
Page 38: Switch Actuator
ABB-Welcome 5.2.12.3 Switch Actuator Fig. 22 Switch Actuator The “Switch Actuator“ has the following functions: Functions Name of an actuator. Address of an actuator. - By touching the button you can add new actuator entry. Delete - By tipping the button to delete an existing actuator. Finally confirm the dialogue box displayed. - Page 39 ABB-Welcome Pressing “Add” or “Adjust” Fig. 23 Switch Actuator The “Intercom” menu has the following functions: Functions Click on this edit box to renam e the relay actuator. Edit the address via the numeric keypad, from 001 to 199. Click on the “OK” button to activate the settings.
-
Page 40: Program Button
ABB-Welcome 5.2.12.4 Program button Fig. 24 Program button The “Program button“ menu has the following functions: Functions Set the functions for the program button, e.g. release the 2nd-lock, call to the guard unit, intercom call, enabling the switch actuator. *2nd-lock means a lock which is connected with an outdoor station (NC- NO-COM) *Only the existing intercom call list &... -
Page 41: Leave Home Management
ABB-Welcome 5.2.12.5 Leave Home Management Forward After(sec): Fig. 25 Leave Hom e Managem ent Information about the settings User can only choose “Call forward” or “Message leaving”. Two functions can’t be activated at the same time! A warning will be given once “call transfer” or “Message Leaving” is activated. - Page 42 ABB-Welcome - Touch this button to activate the settings. Back - Touch this button to return to the system settings menu without saving the settings. Call forward time can be set from 1 to 30s. — 42 —...
-
Page 43: Voice Message
ABB-Welcome 5.2.12.6 Voice Message Fig. 26 Voice Message In totally, 30 voice messages can be recorded. The “Voice Message” menu has the following functions: Functions Direction - Local messages: Message can be heard locally - Absence message: the message can be played for visitors when the “message leaving”... - Page 44 ABB-Welcome -Touch the button to play the voice message. Choosing the “Record a New Message” to create a new voice message. Fig. 27 Voice Message ▶ Choosing “Listen”→“ ” to play a voice message. Fig. 28 Voice Message — 44 —...
-
Page 45: Setting Door Open Password
ABB-Welcome 5.2.12.7 Setting Door Open Password Fig. 29 Setting Door Open Password The “Set Door Open Password” menu has the following functions (The function only can be set in master indoor station): Functions Tick the checkbox to activate or deactivate the password function. -
Page 46: Black List
ABB-Welcome 5.2.12.8 Black list Fig. 30 Black list The “Black List” menu has the following functions (The function only can be set in master indoor station): Functions - The order of a list. Indoor Station Address - Set the address of the target indoor station, from 001 to 250. -
Page 47: Audio Settings
ABB-Welcome 5.2.12.9 Audio Settings Repeated Tone Touch Feedback Fig. 31 Audio Settings The “Black List” has the following functions: Functions Bell sound for the default door - Select a bell sound for the default door by clicking on one of the buttons in the list field. - Page 48 ABB-Welcome - Use the " Plus / minus " buttons to set the time of the mute function which you activate with the "mute" button. - Before adjusting the "Hours" or "Minutes", the active range is highlighted with a frame.
-
Page 49: Auto Unlock
ABB-Welcome 5.2.12.10 Auto Unlock Fig. 32 Auto Unlock The “Black List” menu has the following functions (The function only can be set in master indoor station): Functions Enable Auto Door Unlock - Tick the checkbox to activate or deactivate the auto unlock. - Page 50 ABB-Welcome - Before adjusting the “Hours” or “Minutes”,. the active range is highlighted with a frame. Repeat - Set the repeat frequency with the fold-down menu when you activate the timer. - If you choose “Once”, the function will be disabled after a period of time.
-
Page 51: Display Settings
ABB-Welcome 5.2.12.11 Display Settings Fig. 33 Display Settings The "Display Settings" menu has the following functions: Functions Brightness - Set the brightness of the display with the "Plus / minus" buttons. Enable screensaver - By tick the checkbox to activate or deactivate the screen saver. - Page 52 ABB-Welcome - The resolution of the display is 800 x 600. Larger pictures will be reduced to this size. - The format supported is "jpg". Automatic Fullscreen - Activate or deactivate the full-page mode of the door camera by ticking the checkbox.
-
Page 53: Date And Time
ABB-Welcome 5.2.12.12 Date and Time Fig. 34 Date and Time The "Display Settings" menu has the following functions: Functions Time - Select the format of the displayed time via the fold-down menu. - Available are 12 h am/pm / 24 h. - Page 54 ABB-Welcome - Set the time with the "Plus / minus" buttons. - Before adjusting the "Hours", "Minutes" or "Seconds", the active area is highlighted with a frame. — 54 —...
-
Page 55: Camera List
ABB-Welcome 5.2.12.13 Camera List SYSTEM SETTING>CAMERALIST Enable the Name Camreas Outdoor station 01 Visual doorbell Camera 01-1 Delete Back Adjust Fig. 35 Cam era list Functions Refresh camera list - To scan the cameras of Outdoor station or cameras from Camera... -
Page 56: Language
ABB-Welcome 5.2.12.14 Language Fig. 36 Language The "Language" menu has the following functions: Functions Language (list field) - Here the languages available are listed Scroll - To display the hidden languages, tick the scroll boxes. Tick this button to activate the settings. -
Page 57: Setup
ABB-Welcome 5.2.12.15 Setup Indoor Staiton Address Door Status Check Automatic Snapshots Home Automation Illumination Fig. 37 Setup — 57 —... - Page 58 ABB-Welcome The "Set-up"menu has the following functions: Function Door status Check - Tick the checkbox you activate or deactivate the door status check. If activating the function, the outdoor station with a sensor installed will send alarm signal to indoor station when the door is open over time.
- Page 59 ABB-Welcome *) free@home: Commissioning is always carried out via the Web-based surface of the System Access Point. The System Access Point establishes the connection between the free@home participants and the smartphone, tablet or PC. It is used to identify and program the participants during commissioning.
-
Page 60: Firmware Update
ABB-Welcome 5.2.12.16 Firmware Update If the firmware for your device is to be updated, carry out the following steps: Get the new version of firmware from your electrical installer, and copy it into a SD- card. Insert the SD-card into the card slot on your indoor station. -
Page 61: Cleaning
ABB-Welcome Cleaning Pos: 68 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/Reini gun g/Reini gun g T ouchsc ree nm onito r @ 19\m od_ 131 073 410 897 8_15 .docx @ 1 078 62 @ @ 1 Caution Risk of damage to the screen surface. -
Page 62: Adjusting The Device
ABB-Welcome Pos: 70 /Di nA4 - A nleitu ngen Onlin e/Ueb ersc hrift en/2 ./Ge raet eeins tellun gen @ 1 8\mo d_1 302 768 847 744 _15. docx @ 10 354 8 @ 2 @ 1 Adjusting the device Pos: 71 /Di nA4 - A nleitu ngen Onlin e/Ueb ersc hrift en/3 ./Abschl usswide rsta nd @ 19\ mod _13 219 5807 990 6_1 5.do cx @ 1100 83 @ 3 @ 1... -
Page 63: Connection
ABB-Welcome 5.4.2 Connection Fig. 39: Functions Connection for the door bell push-button • Connection for the system controller • When using several indoor stations: connection for the internal bus Connection for free@hom e system Pos: 75 /B usch-J aeg er (Neus truk tur )/M odul -Strukt ur/O nline -Doku me ntatio n/Steu er mod ule - Onlin e-Dok ume ntati on ( -- > F ür alle Dok ume nte <- -)/ +++ ++ ++ +++ ++ S eiten umb ruch + +++ ++ ++ +++ + @ 9\m od_ 126 8898 668 093 _0. docx @ 521 49 @ @ 1... -
Page 64: Technical Data
ABB-Welcome Pos: 76 /Di nA4 - A nleitu ngen Onlin e/Ueb ersc hrift en/1 ./T echnisc he D aten @ 18 \mo d_1 302 615 863 001 _15. docx @ 10 341 6 @ 1 @ 1 Technical data Pos: 77 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tech nische Date n - 832 20-AP-x xx @ 1 8\m od_ 130 321 285 4559 _15 .docx @ 1 037 05 @ @ 1... -
Page 65: Mounting / Installation
ABB-Welcome Pos: 79 /B usch-J aeg er (Neus truk tur )/M odul -Strukt ur/O nline -Doku me ntatio n/Übe rsch rifte n ( --> Fü r alle Doku men te < -- )/1. E bene /M - O/ Mont age / Ins tallatio n @ 18\ mod _13 0261 396 611 1_1 5.do cx @ 1 033 73 @ 1 @ 1 Mounting / Installation Pos: 80 /B usch-J aeg er (Neus truk tur )/M odul -Strukt ur/O nline -Doku me ntatio n/Siche rheit (- ->... -
Page 66: General Installation Instructions
ABB-Welcome • Check the type supply network (TN system, IT system, TT system) to secure the following power supply conditions (classic connection to ground, protective earthing, necessary additional measures, etc.). Pos: 82 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/M onta ge/ Mont age hinweis e - Allg emei n @ 1 9\m od_ 131 056 367 047 8_15 .docx @ 1 077 43 @ 2 @ 1 General installation instructions •... -
Page 67: Mounting
ABB-Welcome Pos: 84 /B usch-J aeg er (Neus truk tur )/M odul -Strukt ur/O nline -Doku me ntatio n/Übe rsch rifte n ( --> Fü r alle Doku men te < -- )/2. E bene /M - O/ Mont age @ 1 8\m od_1 302 615 960 458 _15. docx @ 10 342 4 @ 2 @ 1 Mounting Pos: 85. - Page 68 ABB-Welcome Connect the bottom part of the device according to the graphics (see chapter "Connection"). Setting Set the address of the preferred outdoor stations and the address of the indoor station on the rotary switches. Set the master/slave function and the terminal resistor on the switches at the rear of the Terminal Resistor top part of the housing (see chapter "...
- Page 69 ABB-Welcome Mounted with desktop bracket Fix the bottom of the device to the desktop bracket. Latch the upper part of the device onto its bottom part. To do this, place the upper side of the device on the lock-in lugs and then press the bottom side onto the bottom part of the device until the it is caught by the clamp.
- Page 70 W e reserve the right to at all times make technical changes as well as changes to the contents of this document without prior notice. The detailed specifications agreed to at the time of ordering apply to all orders. ABB accepts no responsibility for possible errors or incompleteness in this document.