Figure 5: Gps Cable To Vlp Processor; Figure 6: Gps Puck; Table 8: Gps Puck - Motorola ReaperHD Installation Manual

Figure 5: GPS Cable to VLP Processor

Figure 6: GPS Puck

Table 8: GPS Puck

Number
1
5 For trunk installation, locate a suitable area for the VLP Processor so that the air can flow
around outside of the enclosure.
6 Mount the VLP Processor using screws seated through the notches of the feet of the VLP
Processor on both sides.
NOTE: Ensure that the VLP Processor is fully secured to avoid unnecessary vibration
while vehicle is traveling.
Chapter 1 : Camera System Hardware Overview
Description
GPS Puck
MN009210A01-AB
19