Assembling The Mounting Plate And The Ball Mount - Motorola ReaperHD Installation Manual

3 Attach and tighten the Ball Mount by using the four Short Black Screw.
6.2.2

Assembling the Mounting Plate and the Ball Mount

Procedure:
1 Orient the Mounting Plate so that when the wider end is flat against a surface, the narrow end is
elevated.
2 Align the four wider, adjustable screw holes on the narrow end of the Mounting Plate with the
four screw holes in the other Ball Mount with round base plate.
MN009210A01-AB
Chapter 6 : Parking Enforcement
59