Figure 27: 4G Connector To Vls Tablet Docking Station; Figure 28: Ram Mount Base Plate - Motorola ReaperHD Installation Manual

MN009210A01-AB
Chapter 6 : Parking Enforcement

Figure 27: 4G Connector to VLS Tablet Docking Station

5 For vehicle installation, locate a suitable location for the PoE Injector such that the air can freely
flow around outside of the enclosure.
6 Mount the PoE Injector using screws seated through the notches of the feet on both sides.
NOTE: Ensure that the PoE Injector is fully secured to avoid unnecessary vibration while
vehicle is traveling.
7 Install the Ram Mount base plate.

Figure 28: Ram Mount Base Plate

8 Install the Ram Mount Pole Assembly and VLS Mobile Tablet Cradle to the base plate.
54