Part Name And Function; Front; Front (When The Dust Cover Is Open) - NEC Built-In AIT User Manual

The following AIT cartridges are compatible with this drive:
Tape standard
AIT-3
AIT-2
AIT-1

Part Name and Function

The Built-In AIT and magazine have the following parts and functions.
Important
The part names, functions, and settings of the installed 5.25-in device and installed 3.5-in device
(drive only) are the same. (For clarity, we use the 5.25-in device in the explanations below.)

Front

7

Front (when the dust cover is open)

8
1
18 Built-in AIT
Read from
Yes
Yes
Yes
1
6 5 4 3
Write to
Yes
Yes
Yes
1 Dust cover
2
Protects the cartridge slot against
dust. (→ P. 40)
2 Ventilation holes
(The drive does not have ventilation
holes.)
3 EJECT button
Press this button when ejecting a data
cartridge. (→ P. 41)
4 REPLACE TAPE LED
LED that shows that the AIT data
cartridge needs to be replaced.
(→ P.43)
5 CLEANING REQUEST LED
LED that shows the Built-In AIT
cleaning status. (→ P. 43)
6 TAPE MOTION LED
LED that shows the AIT data cartridge
status. (→ P. 43)
7 Brackets
8 Cartridge slot
Slot in which the AIT cartridge is set.
(→ P. 40)
Tape length
230 m
230 m
170 m
230 m
170 m