Cleaning The Built-In Ait - NEC Built-In AIT User Manual

Important
• Use our "AIT Cleaning Cartridge" to clean the
Built-In AIT. If you use a cleaner of other
manufacturer, a machine failure may be
caused.
• Do not touch the cleaning cartridge tape
surface or rewind the tape.
• You can use the cleaning cartridge for about 70
times. Even if you insert a spent cleaning
cartridge or cleaning ends because the tape
came to an end, the device does not eject the
cleaning cartridge automatically. In this
situation, press the EJECT button. Purchase a
new cleaning cartridge tape.
Hint
Before using the AIT data cartridges, you should clean the read/write head using the cleaning
cartridge once a week. (The cleaning frequency varies depending on the operating environment
(generation of dust and dirt) and the operation frequency. When using the Built-In AIT every day in
a typical office, a weekly cleaning is recommended.)

Cleaning the Built-In AIT

If the Built-In AIT looks dirty, gently wipe its surface with soft cloth moistened with water or
detergent.
Important
Do not clean the Built-In AIT using chemicals such as benzine or thinner (volatile chemicals),
which may cause the unit to be deformed or discolored. For the same reason, do not spray
insecticide. If a chemical adheres to the drive surface, immediately wipe it with soft cloth mois-
tened with water.
44 Built-in AIT