Sealey VS779KIT Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instructions gloves
1. SAFETY
WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools and
‰
equipment.
DO NOT use if damaged.
8
Maintain in good and clean condition for best and safest performance.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and unauthorised persons away from the work area.
9
Ensure that the motorcycle is safely positioned and secured.
8
2. INTRODUCTION
Breaks and re-joins most types of chain quickly and easily. Suitable for most sizes of drive or cam chain from #25 to #520. Supplied with a range
of pins, dies and detailed instructions. Chain link pulling tool is a useful third hand tool for pulling chain ends together while re-linking.
3. CONTENTS
Note: Refer to diagram below for complete list of individual contents. Refer to attached Parts List for Model numbers of parts available as
replacements.
Note: Part numbers 7, 8, 9, 10, 12, 19 are fitted into C body 6 on delivery of product.
© Jack Sealey Limited
MOTORCYCLE CHAIN MAINTENANCE KIT
MODEL NO:
Wear safety
footwear
Original Language Version
VS779KIT
Link to web
instructional
video
VS779KIT Issue 2 (1) 29/03/23