Remove The Ws Contactor - Husqvarna PP492HF Workshop Manual

11
1
3
1 3 6
REPAIR INSTRUCTIONS
2
Remove the WS
contactor
Be sure to document where
all the wires are connected!
First see: Opening the PP 490,
PP 492 (p. 124)
1� Mark and remove all the wires
on the right hand side of the ws
contactor� If replacing the WS
contactor, Remove all the cables�
2� Slide out the ws contactor out
from the DIN-rail�
3� Remove the Fuse box from the ws
contactor by pull it upwards and
bend it out in the top end and
then pull it down again to remove
it�
Reverse step for assembling�
To reconnect wires see electrical
drawings in section: Wiring
Diagrams