Advertisement
Model 11869A
General Information
Table 1 -1.
Supplemental Characteristics of the HP 11869A (1 of 2)
11869A Adapter
The 11869A RF Plug-In Adapter provides the electrical and
mechanical interface between the model 8350A Sweep Oscillator
Mainframe and an 86200 series RF Plug-In. All of the 8350A's
standard operating features including HP-IB remote programming are
available. However, functions specific to the Plug-In
(OUTPUT POWER
LEVEL, RF ON/OFF, etc.)
cannot be controlled or remotely programmed
by the 8350A Mainframe.
Option 004
(Rear-Panel RF Output)
The 11869A Option 004 is designed for use with 86200 series Option
004 Plug-Ins
(with rear-panel RF OUTPUT). The 11869A Option 004 is
supplied with two pre-shaped semi-rigid coax cables with mating
connectors to extend the RF OUT from the rear panel of the Plug-In
to the rear panel of the 11869A Adapter, and with a Type-N(f)
output connector. Two different RF OUT cables are supplied to match
different Plug-In models
(see Figure 1-3).
Option 006
(Rear-Panel AUX OUT Connector)
The 11869A Option 006 is designed for use with 86200 series
Plug-Ins which have a rear-panel auxiliary output. The Option 006
is supplied with a pre-shaped semi-rigid cable to extend the AUX
OUT from the rear panel of the Plug-In to the rear panel of the
11869A Adapter, and with a Type-N(f) output connector
(see Figure
1-1). If the Plug-In is an Option 004 Plug-In
(rear-panel RF
output) which also has a rear-panel auxiliary output,
the 11869A
Adapter used is an Option 004 and Option 006.
Rear Panel Description
On the rear panel of the 11869A are five hole plugs that can be
removed to allow connections to be made through the rear panel to
the rear panel of the Plug-In. For user convenience the holes are
labeled; AUX OUT, EXT ALC IN, RF OUT, PULSE IN, and FREQ REF.
Three short BNC interconnect cables are supplied to extend the
Plug-In EXT ALC IN, PULSE IN, and FREQ REF to the rear panel of the
11869A Adapter for external access. A BNC-to-SMD cable is installed
for connection of the 8350A FM INPUT signal through the Adapter to
the rear panel of the Plug-In.
1-3
Advertisement
