Installing The Radio; Mobile Microphone - Kenwood TK-705D Instruction Manual

4-4. INSTALLING THE RADIO
Mount the two-way radio so that the controls are within reach of the operator.
Use the mounting bracket as а template to locate the holes, and mount the
radio. Be sure to leave enough room at the rear of radio for cable connections.
Before attaching the radio in the mounting bracket, connect the antenna plug,
system plug and microphone.
WARNING .
For passenger safety, mount the radio securely so that the unit will not break
loose in the event of a collision. This is especially important in station wagons, |
vans and similar type installations where a loose radio could be extremely
dangerous to the vehicle occupants.
4-5. MOBILE MICROPHONE
Mount the microphone where it will be within reach of the operator, but will not
interfere with safe operation of the vehicie. After mounting the microphone
hanger, connect the microphone plug to the microphone jack on the front of the
radio.