Panasonic A Series Service Manual page 11

PFC sensor
PCC sensor
Take SENSOR PFC and
PCC out of the hook.
Remove the tape, separate INS DAMPER PCT/ PCB & TWIN ELECTRIC DAMPER AS.
6.7 Disassemble FAN MOTOR AS.
Remove the tape of
connector of FAN MOTOR
6.8 Disassemble FC
Remove 2 screw of HINGE
CENTER then take FC out
Open 2 hook at 2 sides, take INS DAMPER out
INS DAMPER PCT
Taking out FAN MOTOR by
using two hands push into the
hook as show in fingure.
11
INS DAMPER
COVER DAMPER
INS DAMPER PCB
TWIN ELECTRIC DAMPER AS
stamped side
Fan may be installed in wrong
side.
Be noted that stamping side has
to be upside.