6. DISASSEMBLY INSTRUCTION
6.1. Disassemble DOOR CONTROL AS.- X series
DOOR CONTROL AS. on
Take the hook along on
DOOR CONTROL AS. by
shaking well on both sides.
screw
Take out 1 screw on circuit
board
1
2
3
Use small knife, take out from the upper right side of DOOR
Connector
Take out 1 connector then disassemble DOOR CONTROL AS.
Push on the open hook and
keep the circuit to take PAS-
OPERATION PCB(DOOR) out
1. PAS-OPERATION PCB(DOOR)
2. ESCUTCHEON CONTROL
3. HOLDER BOARD
8
CONTROL AS.
Use small knife to separate
HOLDER BOARD and
ESCUTCHEON