After Operation
After Mowing
Wash the machine and grease it.
Towing the Machine
In case of an emergency, you can tow the machine for a short distance; however, Toro does
not recommend this as a standard procedure.
Do not tow the machine faster than 3 to 4 km/h (2 to 3 mph) because it may damage
the drive system. If you must move the machine a considerable distance, transport it
on a truck or trailer.
1. Open the hood.
2. Near the right hood latch, rotate the handle-
bypass valve
3. Close and latch the hood.
4. Connect the tow vehicle to the machine at the
tie-down points.
5. Sit in the operator's seat, and if needed, use
the parking brake to control your machine
while being towed.
Do not start the engine while the bypass valve is open.
6. Before starting the engine, close the bypass valve by rotating it 90° (1/4 turn).
3466-297A
IMPORTANT
on the pump 90° (1/4 turn).
IMPORTANT
Page 5–11
G413470
Operation: After Operation