Table of Contents
Advertisement
After Operation
After Operation Safety
General Safety
•
Always shut off the machine, remove the ignition
key, wait for all moving parts to stop, and allow
the machine to cool before adjusting, servicing,
cleaning, or storing it.
•
Clean grass and debris from the cutting units,
mufflers, and engine compartment to help prevent
fires. Clean up oil or fuel spills.
•
Shut off the fuel before storing or transporting the
machine.
•
Disengage the PTO whenever you are transporting
or not using the machine.
•
Never store the machine or fuel container where
there is an open flame, spark, or pilot light, such
as on a water heater or on other appliances.
•
Use full-width ramps for loading the machine into
a trailer or truck.
•
Tie the machine down securely using straps,
chains, cable, or ropes. Both front and rear straps
should be directed down and outward from the
machine.
Transporting the Machine
WARNING
Driving on the street or roadway without
turn signals, lights, reflective markings, or a
slow-moving-vehicle emblem is dangerous
and can lead to accidents, causing personal
injury.
Do not drive the machine on a public street
or roadway.
Transporting the Machine
Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary lighting and marking as required by law.
Thoroughly read all of the safety instructions. Knowing
this information could help you, your family, pets, or
bystanders avoid injury.
To transport the machine:
•
Use full width ramps when loading the machine.
•
Be sure the fuel shut-off valve is closed.
•
Engage the park brake, then block the wheels. Do
not rely solely on the parking brake to hold the
machine on the trailer.
•
Securely fasten the machine to the trailer or truck
with straps, chains, cable, or ropes. If possible,
both front and rear straps should be directed down
and outward from the machine.
•
Secure a trailer to the towing vehicle with safety
chains.
22
Advertisement
Table of Contents
