Table of Contents
Advertisement
Driving the Machine
CAUTION
The machine can spin very rapidly by
positioning one lever too much ahead of the
other. The operator may lose control of the
machine, which may cause damage to the
machine or injury.
• Use caution when making turns.
• Slow the machine down before making
sharp turns.
Important:
To begin movement (forward or
backward), the brake lever must be disengaged
(pushed forward) before the motion control levers
can be moved or the engine will stop.
When the motion control levers are positioned fully
outward (apart), the drive system is in the PTO
disengage position
(Figure
Note:
The "N" LCD indicator appears when both
levers are in the neutral lock position.
When the motion control levers are moved directly
inward (together) the drive system is in the neutral
operate position.
Figure 10
1. Neutral lock position
(handles out)
2. Neutral operate position
(handles in)
3. Front of machine
4. Reverse
Driving Forward
1.
Make sure the motion control levers are in the
neutral position.
2.
Release the parking brake.
3.
To move forward in a straight line, move both
levers forward with equal pressure.
10).
5. Rear reference bar
6. Front reference/speed
control bar
7. Forward
8. Adjustment hole
To turn left or right, pull the motion control lever
back toward neutral in the desired turn direction.
The machine will move faster the farther the
motion control levers are moved from the neutral
position.
4.
To stop, position both of the motion control
levers in the neutral operate position.
Driving in Reverse
1.
Move the motion control levers to the neutral
operate position.
2.
To move rearward in a straight line, slowly move
g224633
both of the levers rearward with equal pressure.
19
Figure 11
g014656
Advertisement
Table of Contents
