Forwarding A Call; Creating A Conference - Huawei eSpace 7810 Quick Start Manual

User A presses the <Transfer> key to initiate the call. After that, user C's
phone rings. After user C picks up the phone, user A's phone hangs up
automatically to complete the transfer.
Semi-consultation transfer

User A presses the <OK> key to initiate the call. When user C's phone
rings, user A presses the <Transfer> key, and user A's phone hangs up
automatically. The transfer is complete when user C picks up the phone.
Consultation transfer

User A presses the <OK> key to initiate the call. After user C picks up the
phone, user A asks user C whether user C wants to answer user B's call. If
user C wants to answer, user A presses the <Transfer> key to complete
the transfer.
Step 4
User B talks with user C.

Forwarding a Call

You can forward calls after configuring the call forward function. The eSpace 7810
supports automatic forwarding (including Always Forward, Busy Forward, and No
Answer Forward) and manual forwarding.
If you enable the automatic forwarding function, the eSpace 7810 automatically
forwards incoming calls based on the preset forward type. If you enable the manual
forwarding function, you can forward an incoming call by pressing the soft key
<Transfer> and entering the forward-to number.

Creating a Conference

User A and user B in a call can create a three-party conference. Assume that user A
wants to create a conference. The procedure is as follows:
Step 1
User A presses the <Conference> key. User B is held, and user A hears the
dial tone.
Step 2
User A dials user C's number and presses the <OK> key.
Step 3
When user C picks up the phone, user A can only talk with user C. To
establish a three-party conversation, user A must press the <Conference>
key.
When user A hangs up the phone, the other two parties' conversation ends
automatically.
10