Huawei IP Phone eSpace 7810&7820&7830&7850&7870&7803X V100R001 Administrator Guide Issue Date 2011-12-31 HUAWEI TECHNOLOGIES CO., LTD.
Page 2
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
About This Document Intended Audience 1 Overview describes the functions, service features, and networking of the eSpace 7810, eSpace 7820, eSpace 7830, eSpace 7850, eSpace 7870, and eSpace 7803x. 2 Single IP Phone Configuration describes how to configure an IP phone.
Administrator Guide 1 Overview Overview 1.1 Principle Huawei IP phones use the digitalized transmission technology in packets based on the IP technology. The basic principles are as follows: Compress and encode voice data according to the voice compression algorithm.
To use the keypad to set a static IP address, proceed as follows: Press Menu on the IP phone to access the main menu. For eSpace 7810, press MENU to access the main menu. Press 3. The Setting Type page is displayed.
Press the up arrow key or down arrow key to select IP, press Del to delete the default IP address, and enter the required IP address. For eSpace 7810, press X to delete the default IP address. 10. Set Subnet Mask, Default Gateway, Pri DNS, and Sec. DNS, and click Save.
Page 12
Account: Set IP phone's SIP account parameters on this tab page. eSpace 7870 and 7850 supports a maximum of six accounts, eSpace 7830 and 7820 supports a maximum of three accounts, and eSpace 7810 supports a maximum of two accounts. ...
Page 17
STUN server to check firewalls or NAT and their types. If the NAT is the Full Cone, Restricted Cone, or Port-Restricted Cone mode, eSpace 7810 attempts to use the public IP address and port number to send all SIP and Service Data Point (SDP) information.
2 Single IP Phone Configuration 2.4 Phone Configuration 2.4.1 Configuring Common Operations For details on how to configure an IP phone, see the Huawei IP Phone eSpace xxxx IP Phone User Manual, in which xxx represents the IP phone model. 2.4.2 Configuring Softkey Layout The four soft keys on eSpace 7870, 7850, 7830 and 7820 are programmable when the IP phone is in the specified 12 states.
Compared with memory keys, line keys have the Label parameter. After Label is set, its value is displayed on the IP phone's LCD. The Label parameter is unavailable to eSpace 7830. Compared with eSpace 7850, eSpace 7810 does not have the line key types: Remote group ...
Page 53
The programmable keys on eSpace 7820 are as follows: four soft keys, four arrow keys (up, down, left, and right), OK, X, TRAN. The programmable keys on eSpace 7810 are as follows: four arrow keys (up, down, left, and right), OK, X, CONF, HOLD, and TRAN.
XML Browser. The seven types template of XML files are delivered with the software version and are available at http://support.huawei.com/. Server Configuration HTTP and HTTPS can be used to download files for the XML browser. For details on how to configure the HTTP server, see 5.2 Configuring the HTTP...
Page 69
7810&7820&7830&7850&7870&7803X Administrator Guide 2 Single IP Phone Configuration Log in to http://support.huawei.com/ to download XMLIdleScreen.exe.The path is SUPPORT > Software Center > Version Software > Application and Software Product Line > Application and Software Solution > Enterprise UC>IP Phone. Run XMLIdleScreen.exe.
Huawei IP Phone eSpace 7810&7820&7830&7850&7870&7803X Administrator Guide 2 Single IP Phone Configuration The parameters framed in red in Figure 2-36 are not described in the Huawei IP Phone eSpace 78XX User Manual. Table 2-29lists the parameters. Table 2-29 Parameters for advanced functions Parameter...
Page 78
UltraEdit to edit XML files. The three .xml files are delivered with the software version and are available at http://support.huawei.com/.The IP phone downloads the Menu.xml file first, and then downloads the PC.xml and Tester.xml files based on the URLs in the Menu.xml file.
Page 95
To upgrade eSpace 7820, rename the file to t22.rom. − To upgrade eSpace 7810, rename the file to t20.rom. Use the network cable to connect a faulty IP phone to the LAN. Hold down the SPK key and power on the eSpace 7850.
IP phones of the same model use the same configuration file. The configuration file name for each phone model is as follows: For eSpace 7810, the file name is 7810.cfg. For eSpace 7820, the file name is 7820.cfg.
Solution > Enterprise UC>IP Phone. eSpace 7810, eSpace 7820, eSpace 7830, eSpace 7850 use the same configuration file. When loading the configuration file to a phone, change the name of the configuration file to the model name of the phone.
The template of local phone book file exported on the web configuration page is delivered with the software version and is available at http://support.huawei.com/. 3.3 Configuring and Upgrading IP Phones in Batches Ensure the power supply of an IP phone during the upgrade.
If the DND icon is displayed on the IP phone's LCD, the DND function is enabled. When eSpace 7810 is in the standby state, press the Menu soft key, select Features, and press Enter. Then select DND and press Enter. Press the left or right arrow key to select Disabled, and press the OK key.
Huawei IP Phone eSpace 7810&7820&7830&7850&7870&7803X Administrator Guide 5 Appendix Right-click Huawei.com and choose New Host(A). After setting the host name and IP address, click Add Host. Repeat the preceding operation to create multiple records of Type A. 5.4 Setting Up the DHCP Server 5.4.1 Setting Up the DHCP Server in the Window 2003 Server...
Page 133
Set the name of the DHCP server randomly, and then click OK. If the setting is successful, the page shown in the following figure is displayed. Right-click Huawei[10.10.10.2] and choose New Scope. In the New Scope Wizard dialog box that is displayed, click Next.