Huawei espace 7810 Administrator's Manual page 102

Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803X
Administrator Guide
Table 3-1 Option 246 parameter settings
Setting Format
IP
IP:port
Domain
Domain:port
3.
Verifying the Configuration and Upgrade
After you complete the preceding procedure, test on certain IP phones to ensure that the IP
phones run normally.
Use the following methods to verify that the batch configuration and upgrade are successful:


In the standby state, press OK to access the Status GUI, and verify that the version number
corresponding to Firmware is the same as that of the firmware version file.
If some phones failed to be configured or upgraded, the possible cause is that too many
phones send configure and upgrade requests to the server at the same time, and the server
cannot handle all those requests. You are advised to restart these phones. The phone
downloads the configuration file and firmware version from the file server during the restart.
Issue 01 (2011-12-31)
− It is optional to specify the configuration file name. The IP phone will automatically
search for and download the configuration file mapping its model.
Table 3-1 describes the Option246 parameter settings.
Example
http://server IP
http://server IP:port
http://domain
http://domain:port
Power on all IP phones.
After being powered on, a phone obtains the IP address from the DHCP server. Then the
DHCP server delivers the configuration file URL to the phone using the Option246
parameter. After receiving the URL, the phone obtains the global configuration file from
the file server to update the phone configurations, and downloads files such as the
firmware version file from the URLs specified in the configuration file.
Configuration result
Access the web configuration page and verify that the configurations are the same as
those in the configuration file.
Upgrade result
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Batch Configuration and Upgrade of IP Phones
96