Configuring Pc Ports - Huawei espace 7810 Administrator's Manual

Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803X
Administrator Guide
Table 2-5
Table 2-5 Network port parameters
Parameter
DHCP
Static IP Address
PPPoE

2.3.2 Configuring PC Ports

When the network port on a PC connects to the PC port on an IP phone, the phone functions
as a network bridge or a router.
Set PC port parameters in the PC Port area on the Network tab page, as shown in
To configure the PC port for eSpace 7870, click the Network tab and click Basic.
Figure 2-7 Setting PC port parameters
Table 2-6
Issue 01 (2011-12-31)
lists the network port parameters.
Description
If this option is selected, eSpace 7850 automatically connects
to the DHCP server for obtaining resources such as the IP
address, subnet mask, gateway, and DNS server information.
If this option is selected, you must set network parameters
including IP Address, Subnet Mask, Default Gateway,
Primary DNS, and Secondary DNS. For details about these
parameters, contact the network administrator.
If an xDSL modem is used, PPPoE can be used to connect an
IP phone to the network. If this option is selected, you must
set User and Password. For details about these parameters,
contact the network service provider.
lists the PC port parameters.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Single IP Phone Configuration
Figure 2-7.
17