Configuring Ldap; Web Configuration - Huawei espace 7810 Administrator's Manual

Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803X
Administrator Guide
Section Header
and Path
Parameters for the other four remote addresses are the same as those for the first one. The
only difference is the numbers in the headers.
The header for the second remote address book is [ RemotePhoneBook1 ], the header for
the third remote address book is [ RemotePhoneBook2 ], and the header for the nth remote
address book is [ RemotePhoneBook(n-1) ].

2.5.2 Configuring LDAP

Function Description
Based on X.500, the Lightweight Directory Access Protocol (LDAP) is an application
protocol for reading and editing directories over an IP network. LDAP supports TCP/IP.
For example, in a tree structure, the root is the company name, the company contains
departments, and a department contains employees. The IP phone can search for contacts
based on specific rules. For example, the IP phone searches for contacts whose department
names contain J.
eSpace 7870, 7850, 7830 and 7820 that support LDAP provide the following functions:




Web Configuration

Before using the lightweight directory access protocol (LDAP) directory, you must first set up
the LDAP server(For example, Windows 2003 Server active directory (AD) ). For details
about how to install and set up the Windows 2003 Server AD, see 5.6 Using Windows 2003
Server AD.
Table 2-32
Issue 01 (2011-12-31)
Parameters
Search for contacts.
After a user presses the LDAP DSS key and enters a number or letter, the IP phone
searches the LDAP server for contacts based on a specific rule and displays the search
result on the LCD. The user then can select a contact and initiate a call, or add the
contact to the local address book or blacklist.
Display the calling party's name.
After receiving a call, the IP phone searches the local address book for the calling
number. If no record is found, the IP phone searches the LDAP server for the contact and
displays the search result on the IP phone's LCD.
Search for the number that a user dials.
Each time a user presses a number key, the IP phone searches the LDAP server for the
matching number. If records are found, the IP phone displays the records on the LCD.
Then the user can select a contact to make a call.
lists common LDAP attributes for eSpace 7870, 7850, 7830 and 7820.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Single IP Phone Configuration
Permitted Values Description
left blank by
default.
76