Huawei espace 7810 Administrator's Manual page 167

Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803X
Administrator Guide

1.
2.
Figure 5-38 Analysis on burst traffic

Issue 01 (2011-12-31)
Analyzing Burst Traffic
You can use the Wireshark to analyze the burst traffic. The steps are as follows:
Choose Statistics > IO Graphs to display the IO Graphs dialog box.
Adjust the values of parameters in X Axis and Y Axis.In Graphs, the five columns
indicate the modes of displaying the traffic figure according to five filtering conditions.
You can select one or multiple modes.
For example, set the filtering condition to udp in column 1 and click Graph1. The UDP
traffic is displayed in black curve. Set the filtering condition to tcp in column 3 and click
Graph3. The TCP traffic is displayed in green curve.
Multicast Traffic
You can use the Wireshark to view the statistics on multicast flows among the captured
packets, including the source address, source port, multicast address, multicast port, and
average traffic.
Operation procedure: Choose Statistics > Multicast Streams, as shown in
5-39.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Appendix
Figure
161