Mitsubishi Electric ecodan PAR-WT60R-E Installation Manual page 11

Touch, and
for at least 3 seconds until the mode num-
ber blinks.
Touch or button to choose a mode
number.
The display stops blinking and lights stead-
ily.
When button is touched in the middle of
setting, the screen returns to the previous in-
dication.
Pairing address dis-
0
play
1 Pairing
2 Temperature unit
3 Communication test
Room temperature
4
display
Automatic zone no.
5
display
Set the mode no. to "0".
The display to the right shows that the ad-
dress is set to "2".
For details, refer to "5. Pairing process".
Set the mode no. to "2".
The temperature reading can be selected be-
tween Celsius (°C) or Fahrenheit (°F).
Touch or button to select °C or °F and
touch
buttons simultaneously
button.
To view the own pairing address of the wireless
remote controller.
To perform a pairing process with the wireless re-
ceiver.
To select °C or °F.
Communication test with the wireless receiver.
Actual room temperature display
To enable or disable automatic zone no. display.
<Remote controller Display>
Mode No.
Functions
<Remote controller Display>
<Remote controller Display>
settings
EN
°C
ON
OFF
10