Husqvarna T 4000 Petrol Operator's Manual page 18

HEPA filter. Refer to
equipment on page 6
1. Loose the 5 screws on the HEPA filter compartment.
2. Remove the HEPA filter from the product and put it
into a clean plastic bag.
WARNING:
to local regulations.
3. Install a new filter.
4. Tighten the 5 screws on the HEPA filter
compartment.
To install a new Longopac dust bag
WARNING:
before you replace the Longopac dust bag.
1. Put the Longopac dust bag in the holder.
18
Personal protective
Dispose the bag, refer
Always clean the prefilter
2. To attach the Longopac dust bag holder, twist the
Longopac dust bag holder until the pins engage in
the slots.
3. Pull the Longopac bag up from the holder and put it
around the container.
4. Tighten a strap around the Longopac dust bag and
the container to attach the bag correctly to the
container.
5. Pull the Longopac dust bag down on the outer side
of the bag holder.
2065 - 001 - 12.06.2023