Table of Contents
Advertisement
SAFETY
4 WARNING
* The information in this manual
should be followed exactly.
- Afire or electrical shock may result causing
property damage, personal injury or death.
4 WARNING
- Any person should not
step or sit on the oven
door. You should install the
Anti-Tip Bracket supplied
with the range.
- The range could be tipped and
injury might result from spilled hot
liquid, food, or the range itself.
IN
cr
- If the range is pulled away from
the wall for cleaning, service, or
any other reason, ensure that the
Anti-Tip Device is properly
reengaged when the range is
pushed back against the wall.
4 CAUTION
* You should put on gloves during
the installation procedure.
\ Failure to do so can result in bodily injury.
NOTE
« Read all instructions contained in these installation
instructions before installing range.
* Remove all packing materials from the oven
compartments before connecting the electrical
supply to the range.
* Observe all governing codes and ordinances.
« Be sure to leave these instructions with the consumer.
NOTE
Keep these instructions with your owner's manual for
future reference.
« As when
using any appliance generating heat, there
are certain safety precautions you should follow.
« Be sure your range is installed and grounded
properly by a qualified installer or service technician.
¢ Make sure the wall coverings around the range can
withstand the heat generated by the range.
* To eliminate the need to reach over the surface
elements, cabinet storage space above the elements
should be avoided.
PREPARE TO INSTALL THE RANGE
TOOLS NEEDED
Phillips Screwdriver
a
Flat-blade
Screwdriver
Safety Glasses
=
Pencil
Gloves
Tape Measure
PARTS PROVIDED
Template
ROLLY
Anchor Sleeves
Anti-Tip Bracket Kit
Lag Bolts
(For Anti-Tip Bracket Mounted
on Concrete Floors and Walls)
PARTS NOT PROVIDED
Strain Relief
(For Conduit
installations Only)
(UL Approved 40 or 50 AMP)
4-Wire Cord
OR:
-3-Wire Cord
Advertisement
Table of Contents
