Monitor And Lcd Adjustments; Contrast And Brightness Adjustment - GE LOGIQ 5 Service Manual

GE M S
EDICAL YSTEMS
D 2300000, R
IRECTION EVISION
Section 6-5

Monitor and LCD Adjustments

6-5-1

Contrast and Brightness Adjustment

To adjust the contrast and brightness:
1.) Press the Toggle button (1) for contrast and brightness. Confirm that the contrast (or brightness)
indicator is displayed on the monitor. If the brightness is displayed, press the toggle button again.
2.) Press the Adjustment button (+, 2) to increase contrast (or brightness).
3.) Press the Adjustment button (-, 3) to decrease contrast (or brightness).
The amount of contrast (or brightness) is shown on a slide bar on the screen. Refer the following
table for the setting.
Table 6-21
Room Condition
room for Cardiology
Record the final brightness and contrast settings and leave this information withe the system. Generally
speaking, do not change the controls once they have been set, the display becomes the reference for
the hard copy device(s).
NOTE: After readjusting the monitor's Contrast and Brightness, readjust all preset and peripheral
settings.
6 - 8
1
Figure 6-9 Monitor
Contrast and Brightness Recommended Setting
Dark room
Dim room
Bright room
Section 6-3 - Power Supply Adjustment
Monitor Adjustment
Contrast
50
60
70
80
LOGIQ™ 5 S
ERVICE
Brightness
40
35
30
20
M
ANUAL