Ecg Cable Hook - GE LOGIQ 5 Service Manual

GE M S
EDICAL YSTEMS
D 2300000, R
IRECTION EVISION
8-4-4

ECG Cable Hook

Purpose: This is a description on how to remove and replace the TGC Cable Holder.
8-4-4-1 Tools
• Common pillips screwdrivers
8-4-4-2 Needed Manpower
• 1persons, 3 minutes + travel
8-4-4-3 Preparations
• Shut Down the System and switch off the Main Breaker at the rear as described in section 4-3-2 on
page 3.
8-4-4-4 Removal Procedure
1.) Turn OFF the system.
2.) Unscrew two(1-2) screws from the bottom of the keyboard. Refer to Figure 8-26.
2
Figure 8-26 Removing ECG Cable Hook
Chapter 8 Replacement Procedures
LOGIQ™5 S
ERVICE
2
1
M
ANUAL
8-21