Bosch Professional GCM 254 D Original Instructions Manual page 19

Symbols and their meaning
the base blade thickness and the saw
blade hole diameter, as well as the tool
spindle diameter. Wherever possible, use
the reducers provided with the saw
blade.
The saw blade diameter must match the
information specified on the symbol.
The left/right adjustable fence must be
removed when sawing bevel angles.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. Mitre
angles of –47° to +52° as well as bevel angles of 45° (left-
hand side) to 45° (right-hand side) are possible.
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Locking screw for slide device
(2) Slide device
(3) Laser warning label
(4) Transport handle
(5) Handle
(6) Lock-off function for On/Off switch
Protective guard
(7)
(8) Retracting blade guard
(9) Mounting holes
(10) Insert plate
(11) Lock button for mitre angle
(12) Locking knob for all mitre angles
(13) Lock button for bevel angle
Bosch Power Tools
(14) Angle indicator for mitre angles
(15) Detents for standard mitre angles
(16) Saw table extension
a)
(17) Workpiece support
(18) Fixed fence
(19) Adjustable fence
(20) Screw clamp
(21) Adjustment knob for 0° bevel angle
(22) Depth stop
(23) Depth stop adjusting screw
(24) Hex key
(25) Transport Safety Lock
(26) Length stop
(27) Recessed handles
(28) Mounting holes for horizontal fixing
(29) Saw table
(30) Scale for mitre angles
(31) Tilt protector
(32) Guide roller
(33) Spindle lock
(34) Laser beam outlet aperture
(35) On/off switch
(36) On/Off switch for laser (cutting line indication)
(37) Chip ejector
(38) Wing bolt for fixing the adjustable fence
(39) Holes for screw clamp
(40) Stop screw for right-hand bevel angle range
(41) Standard bevel angle stops 45°, 22.5° and 33.9°
(42) Clamping screw for saw table extension
(43) Securing screw for saw table extension
(44) Opening for workpiece support (on power tool)
(45) Opening for second workpiece support (on work-
piece support)
(46) Dust bag
(47) Hex socket screw for mounting the saw blade
(48) Clamping flange
(49) Saw blade
(50) Inner clamping flange
(51) Wing bolt for adjusting the height of the threaded
rod
(52) Threaded rod
(53) Wing bolt for screw clamp
(54) Screw clamp pins
(55) Angle indicator for bevel angles
(56) Scale for bevel angles
(57) Clamping screw for length stop
(58) Guide rail for length gauge
English | 19
1 609 92A 88P | (29.03.2023)