Table of Contents
Advertisement
Power Cable
In accordance
with international
safety standards,
t,his
instrument
is equipped
with a three-wire
power cable.
When connected
to an appropriate
AC power receptacle,
rhis cable grounds
the instrument
cabinet.
The type of
power cable shipped with each instrument
depends on
the country
of destinat,ion.
Refer to Figure 1-l for the
part numbers
of the power cables available.
Warning
To avoid
the
possibility of
injury
or death,
the
precautionary Mrnings
given on
the
inside
front-cover of the manual most
be
followed
before
the
instrument is switched on.
Figure l-l. Power Cables - Plug Identification
The following
work should be carried out, by a qualified
electrician
all local electrical
codes being strictly
observed.
If the plug on the cable does not fit the power
outlet., or the cable is to be att,ached to a terminal
block,
cut the cable at the plug end and re-wire it.
The color coding used in t.he cable will depend
on the
cable supplied.
If a new plug is to be connected,
it must
Installing the
HP 8110A
l-3
Advertisement
Table of Contents
