Installing In The Portrait Position; Installing The Optional Frame Kit; Installing The Ir Sensor (Option) - Mitsubishi Electric LM55S1 User Manual

P-2 Installing the monitor (continued)

Installing in the portrait position

The monitor can be installed in the portrait position.
Ensure that the monitor is oriented as shown below.
CAUTION:
• The operating environmental condition (temperature) when
the monitor is in the portrait position is 0˚C to 35˚C.
• Proper operation of the monitor is not guaranteed when it is
not mounted as shown below (upside down, face-up, face
down, etc.).
• When mounting an OPS-compliant computer (commercially
available), be sure to set COOLING FAN to ON using
SCREEN SAVER in the CONFIGURATION1 menu of the
OSD screen function. If it is set to AUTO, the life of the
computer may become shorter than that with it set to ON or
the computer may have trouble.
• In the portrait position, the lifetime of the backlight is
shorter than that in the landscape position.
Installation in the portrait position
Turn the LCD monitor 90 degrees clockwise so that the
terminals are located on the left side as illustrated below.
NOTE:
This monitor doesn't have a function to rotate displayed
images. To display images in the portrait orientation, use
already rotated images.
Landscape
90°
Terminals should be on the left side.
Clockwise
Operation environment for portrait installation
When the monitor is installed in the portrait position, the
following conditions should be satisfi ed.
Temperature 0 - 35°C / 32 - 95°F
Humidity 20 - 80% (without condensation)

Installing the optional frame kit

A special optional frame kit can be mounted on the bezel for
the LCD monitor.
Please refer to Quick Start Guide of the special optional frame
kit for the detailed installation procedure.

Installing the IR sensor (option)

The IR sensor supplied with the remote control kit (option) can
be connected to the monitor, and the light sensing position
can be moved for monitor operation within the length of the IR
sensor cable supplied with the remote control kit (option). See
page 11.
Use the remote control (option) within 7 m from the front of the
IR sensor unit of the IR sensor and within 3.5 m at 30 degrees
on the left and right of the IR sensor unit.
English-15
Carry out as necessary
Face-up
Face-down