Table of Contents
Advertisement
P-4
Connection procedure (continued)
Connecting with a video device (component video/HDMI)
This LCD monitor can be connected with video devices such as a DVD player equipped with component video (YPbPr) output and a
DVD player equipped with HDMI output.
Refer to the user's manual of the connected device for details. (Cables shown in the fi gure below are commercially available.)
•
To connect a DVD player equipped with component output to the YPbPr IN connector on the monitor, use a BNC cable (BNC x 3
– BNC x 3) and a BNC – RCA adaptor (commercially available), or a signal cable (BNC x 3 – D connector).
Select [YPbPr] using the INPUT button on the monitor or the YPbPr button on the wireless remote control.
•
To make audio connection, connect an audio cable (RCA) to the AUDIO IN2 connector.
Select [AUDIO IN2] using the AUDIO INPUT buttons on the wireless remote control.
•
To connect a DVD player equipped with HDMI output to the HDMI IN connector on the monitor, use an HDMI cable.
Select [HDMI] using the INPUT button on the monitor or the HDMI button on the wireless remote control.
NOTE:
•
When an HDMI cable is connected, you can select HDMI audio.
•
For details on using the AUDIO INPUT button, see "Audio input change."
LCD monitor
(side)
LCD monitor (rear)
AUDIO IN2
HDMI cable
HDMI IN
YPbPr IN
YPbPr IN
Signal cable
(BNC x 3 to D connector)
Audio cable (RCA)
English-21
To HDMI output
To video output
BNC cable
(BNC x 3 to BNC x 3)
BNC – RCA adaptor
To D connector output
To audio output
DVD player
(HDMI device)
DVD player
(component video device)
Advertisement
Table of Contents
