Toshiba IK-WB02A User Manual page 104

Before Calling Service Personnel...
Symptom
There is no IP
address of your
network camera
on The Camera
Finder's Network
Camera List.
Cannot display a
browser from
Camera Finder.
The message,
"The page
cannot be
displayed,"
shows up, and
cannot login to
the camera even
if you start
Camera Finder.
Cannot login to
the camera even
though entering
the IP address of
the camera
directly to the
browser, and
"The page
cannot be
displayed" shows
up.
88
Cause
GThe power of the camera
is not turned on.
GLAN cable is not
connected.
GLAN cable is not
connected to the PC.
GIP address of the PC is
not configured.
GInstalled directory of
browser is wrong.
GThe IP addresses of the
camera and your PC are
wrong.
GProxy has set to the
browser.
See "The message, 'The page cannot be displayed,' shows up, and cannot login to the
camera even if you start Camera Finder."
How to Manage
GTurn on the power.
GConnect the LAN cable of the camera to a hub or
router in the right way.
GBe sure to turn on the power of the hub and router.
GConnect the LAN cable to the PC in the right way.
GConfigure the IP address of your PC correctly.
(¡ page 15).
GAssign the directory where you are going to install the
browser. Start Camera Finder and go to "View"/
"Customize"/"Default Browser."
GSet the correct IP address of the network camera.
GSet the correct IP address of your PC.
GWhen proxy is set to the browser, sometimes you may
not able to login. Change the setting which will not via
the IP address of the network camera from the proxy of
the browser, or the setting of host name which will not
via proxy.