Toshiba IK-WB02A User Manual page 59

NOTE
• When selecting "Periodic", network camera logs in to FTP server
automatically a minute before the scheduled recording starts. When
the scheduled recording stops, there may be some unsent image data
left in the camera. The camera will not log out from the FTP server
until all images have been transferred.
• When not selecting "Periodic," network camera logs in/out
automatically each time an alarm goes off.
When there is more than one alarm at a time (receiving another
alarm(s) while transferring a file), the camera logs out from the server
after transferring last image data.
GConnect to FTP Enable:
Select one of the following recordable images on an FTP server:
• Periodic (periodic recording by schedule) (➝ page 44)
• Extern Alarm Detection (recording by an external alarm detection)
(➝ page 46)
• Motion Detection (recording by motion detection) (➝ page 46)
• EXT Control (recording by EXT control) (➝ page 48)
• OFF (not to record on an FTP server)
You need to set up the configuration for the item you selected. For setup
details on each item, refer to the section on the next page and after.
Click the "Save Settings" button below the setting.
43