Installing The Processor; Front System Fan; Removing The Front System Fan - Dell YRC3G Owner's Manual

Installing the processor

1 Insert the processor into the processor socket. Make sure the processor is properly seated.
2 Gently lower the processor cover.
3 Press the two release levers down and then move it in to secure it with the retention hook.
4 Install the:
a heat sink and CPU fan assembly
b air shroud
c side cover
5 Follow the procedure in

Front system fan

Removing the front system fan

1 Follow the procedure in
2 Remove the:
a side cover
b front bezel
c PCIe holder
3 To remove the front system fan:
a Unroute the following cables from the card holder [3]:
• SATA 0,1, 2, 3, 4, 5 cable and ODD 0, 1 cable [1]
• USB 3.1 cable [2]
50 Removing and installing components
After working inside your computer.
Before working inside your computer.