Rear Panel Jacks - Hitachi 53SDX89B Operating Manual

Projection color tv
Hide thumbs Also See for 53SDX89B:
Table of Contents

Advertisement

REAR PANEL JACKS
®
O
EXT. DECODERINPUT
660
65o
• W]RELESSOUT
!
®
000"
V_0EO
INPLIT1
INPIJT2
INPUT3
MONITOAOUT
(_) Antenna Input/Output
The remote control allows you to switch between two separate 75-Ohm RF antenna inputs,ANT A and ANT B. ANT A input can
be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture. (ANT B cannot be displayed as a
sub-picture.) The antenna output labeled "TO CONVERTER" allows the ANT A connection to pass directly to a different source
such as a cable box, only when ANT B is displayed as a maLn picture.
(_) AudioNideo
Inputs 1, 2, 3
The iNPUT button will step through each video source and antenna source input each time it is pressed. Use the audio and video
inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (If you have mono sound, insert
the audio cable into the left channel jack.)
NOTE:
You may use VIDEO, S-VIDEO, or COMPONENT: Y-CBCR/Y-PBP R inputs to connect to Input 2, but note that only one
of these may be used at a time.
(_) Monitor Out
These jacks provide fixed audio and video signals which are used for recording. Use the S-Video Output for high quality video
output.
I NOTE:
S-Video Output may be used for recording, only when the input is of S-Video
]
type.
!
(_) Wireless Out
These jacks provide variable audio output to a set of wireless speakers. They can also be used for another stereo system amplifier.
With this connection, the audio can be controlled by the television's main volume and also by an independent volume feature found
in the THEATER-WIRELESS
SOUND menu.
(_) Audio to HI-FI Output
These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can be
controlled by the television's main volume. Use these jacks for the SURROUND Left and Right channels. (See page 22.)
(_
Rear Speaker Output Terminals
These terminals are used to connect external speakers, which are used for the surround sound feature. The volume level is
controlled by the television's main volume and also by an independent rear volume feature found in the THEATER-SURROUND
menu. Use speakers with 8-Ohm impedance only.
(_
S-Video Inputs 1 and 2
Inputs 1 and 2 provide S-Video (Super Video) jacks for connecting equipment with S-Video output capability.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

60sdx88b

Table of Contents