Table of Contents
Advertisement
CONNECTING
EXTERNAL
VIDEO SOURCES
CONNECTING A DVD PLAYER WITH DOLBY DIGITAL TO INPUT 2 COMPONENT: Y-CBCR/Y-PBP R
1.
Connect the cable from the Y OUT of the DVD player to the INPUT 2 (Y) jack as shown on the TV set below.
2.
Connect the cable from the CB/P B OUT or B-Y OUT of the DVD player to the INPUT 2 (CB/PB) jack, as shown
on the TV set below.
3,
Connect the cable from the CR/P R OUT or R-Y OUT of the DVD player to the INPUT 2 (CR/PR) jack, as shown
on the TV set below.
4.
Connect the cable from the Dolby Digital Out (R) of the DVD player to the EXT. DECODER Input (R) jack.
5,
Connect the cable from the Dolby Digital Out (C) of the DVD player to the EXT, DECODER Input (C) jack.
6.
Connect the cable from the Dolby Digital Out (L) of the DVD player to the EXT. DECODER Input (L) jack,
7.
Connect the cable from the Dolby Digital Out (RS) of the DVD player to the EXT. DECODER Input (RS) jack.
8,
Connect the cable from the Dolby Digital Out (LS) of the DVO player to the EXT. DECODER input (LS) jack.
9.
Connect the cable from the Dolby Digital Out (LFE) of the DVD player to the EXT. DECODER Input (LFE) jack.
HO/V sEt.Toe IOX
JO
00J
R
LFE
RSI
DVOPlayer
IPR
P8
Y Jo
O
O
I
_'Similac_iarMMod°de_
°¢
NOTE:
Completely insert the connection cord plugs when connecting to rear panet jacks, The picture that is played back will
be abnormal if the connection is loose.
See page 15 for tips on REAR PANEL CONNECTIONS,
21
Advertisement
Table of Contents
