Advertisement
Calibration Instruction
1. Install the battery, long press the SLOPE BUTTON
POWER BUTTON
the indicators will light up , indicating instrument is in calibration mode;
2. When enter calibration mode, the unit will auto select X direction. Calibrate the
laser through UP/DWON BUTTON
calibration value. The rotating laser will flash 3 times.
Press and hold RPM BUTTON
3.
STEP2 to calibrate Y axis. The two values in X and Y need to be saved
separately.
4. Short press
. Hold the SLOPE BUTTON until POWER BUTTON released. All
(Press time≥3s) to switch to Y axis. Repeat
to exit the calibration mode or power off the rotary directly.
, meanwhile short press the
. Press and hold Slope button
- 9 -
to save the
Advertisement
