Advertisement
Siemens Building Management System (NCCXP-G or -GL, NCCI7-G or -GL, Desigo CC, and
Cerberus DMS)
1. The PAL-1 can be used as a supervised journaling or logging printer when connected to a UL listed
Siemens Building Management System computer to meet the requirements of an NFPA 72 proprietary
system. The printer is supervised for paper out, AC loss, and printer parallel cable removal.
2. Refer to the FireFinder-NCC Operation, Installation and Maintenance Manual, P/N 315-049679, or Desigo
CC Engineering Guide, Document ID A6V10376170, or Cerberus PRO Engineering Guide, Document ID
A6V10376202, for more details on connecting and programming the PAL-1.
3. Figure 6 shows the proper installation of PAL-1 with a NCCXP-G or -GL, NCCI7-G or -GL computer,
Desigo CC or Cerberus DMS.
Parallel Printer (rear view)
See Notes 2 and 3
Junction
Box and Cover
Approved Flexible
(user supplied)
Conduit Connector
(user supplied)
NOTES:
1.
Connect the PAL-1 printer to LPT1 port on the rear of the Siemens Building Management system computer.
2.
NFPA 72 Proprietary and Local System installation requires that the computer, monitor and printer be UL
rated for fire (Siemens models SCDXP/XPWAN-B, SCDXP/XPWAN-BT, SCD-19L-2, SCD-19TL-2, UHW-
W717-00T-M, UHW-W717-00L-M, UHW-W7AO-22T-C, UHW-W7AO-19T-C, UHW-W7XN-00T-M, UHW-
W7XN-00L-M, UHW-0000-22T-L, UHW-0000-42T-L, UHW-0000-22L-L, UHW-0000-42L-L and PAL-1
respectively).
3.
PAL-1 printer is supervised for paper out, AC loss, and printer parallel cable removal by the build
management software at the computer.
4.
All circuits, except AC Input, are power limited.
5.
All cables must be in rigid conduit and cannot leave the room.
Electrical Ratings
120 VAC, 60 HZ, 3A.
120 VAC/60 Hz
Approved 1/2" Flexible
Metallic/Nonmetallic
Conduit (user supplied)
Bushing
(user
supplied)
Siemens Building Management System
Power
AC Main
Supply
120 VAC 60Hz
Power
Connection
Computer (rear view)
Box (not
required for
Rack Mount
or Console
Installations)
Flexible Conduit
(User Supplied)
Junction
Box
(user
AC Main
supplied)
120 VAC 60Hz
Not Supervised
Conduit
Figure 6
5
LCD Monitor
(rear view)
See Note 2
Keyboard & Mouse
(Using Splitter Cable)
5
5
4
4
3
3
2
2
1
1
See NCC-2F Installation Instructions, P/N 315-049430
(Default COM Post Assignment Shown)
.
1
2
3
4
5
6
7
8
Advertisement
