Silvercrest 102539 Operating Instructions Manual page 11

Initial use
GB
Setup
Operation
Weighing items
8
■ Remove all packaging materials from the appliance. Remove the protective
foil from the display 3.
Open the battery compartment 2 on the underside of the scales and remove
■
the small plastic strips which are clamped between the batteries and the
contacts. Close the battery compartment 2 afterwards, such that the battery
compartment cover audibly engages.
■ The scale can display weights in g (grams) / kg (kilograms) or oz (ounces)/
lb (pounds). You can set the unit on the rear of the appliance. Press the
unit switch 9 on the rear of the device to change units. In these operating
instructions, g (grams) is always the unit shown as an example.
Place the scales on a level and heat-resistent surface. A fi rm standing is the
prerequisite for correct measurement.
NOTICE
► This appliance is equipped with non-slip rubber feet. As furniture surfaces
may be made of a variety of materials and are treated with many diff erent
types of cleaning agents, it cannot be completely ruled out that some
substances contain ingredients which may corrode the rubber rests and
soften them. If possible place an anti-slip material under the feet of the
appliance.
1) Press the button ON/OFF/TARE
The start display appears briefl y, then "0 g" appears automatically.
IMPORTANT
Overloading or improper loading lead to irreparable damage
to the appliance.
NEVER place more than 5000 g (11 lb) on the weighing plate 1.
►
Do not place objects or foodstuff s on the display 3 or on the buttons.
►
to switch the scales on.
SNAW 1000 C1