Advertisement
1. Application
This packing specification sheets apply to the moist-proof packing for the GP2AP01VT10F in the taping package.
2. Packaging specifications
2.1 Packaging material
Name
Aluminum laminate bag
Label
Siccative
Packing case
Cushioning material
Indicator
2.2 Packaging method
(1) Fill necessary information to barcode labels.
(2) Paste one of the barcode labels and a moisture indicator to a tape reel
(3) Seal the aluminum laminated bag that contains the tape reel and siccative, and paste one of the
(4) Pack 5 aluminum laminated bags (contains 1 reel each) into the designated packing case, where Urethane
cushioning material are placed on the top of the packing case.
Package shape
Tape reel (φ180mm)
Minimum order/shipment quantity should be 1 laminated bag.
(5) The packing case would be then sealed with the craft tape, with barcode label (based on EIAJ C-3).
(Total of 5,000pcs. per carton) * Except for the case that device is removed.
3. Storage and Treatment after Unsealed
3.1 Storage conditions The delivered product should be stored with the conditions shown below;
The warranty term for the shipped product shall be for 1 year after shipping to the designated place by the ordered customer.
3.2 Treatment after open
(1) After unsealed, devices should be mounted under the temperature condition of 10 to 30℃, at the humidity condition
of below 70%RH, within 7days.
(2) In case that long term storage is needed, devices should either be stored in dry box, or re-sealed to moist-proof bag
with siccative and leave them in the environment where the temperature is 10 to 30℃, at the humidity condition
of below 70%RH. Devices must be mounted within 2 weeks.
3.3 Baking before mounting
In the event that the devices are not maintained in the storage conditions described above, or the enclosed siccative indicator
already turned its color to pink, baking must be applied before devices are to be mounted.
The case that Devices was not mounted under the temperature condition of 10 to 30℃ at the humidity
condition of below 70%RH or lower within 7days, Baking process must be applied before devices are to be mounted.:
Please also note that baking should only be applied twice.
Recommended condition : ①100 to 110℃, 12 to 24 hours ②125℃, 6 to 24hours
※ Baking will not properly done in packing condition.
To complete the baking properly, devices should be placed to the metal tray.
Recommended condition of reel baking :125℃, 6 to 24hours
※ In the case of reel baking, hung the reel in the oven by passing the shaft in the center hole of reel.
Please avoid laying the reel.
GP2AP01VT10F
Taping moisture-proof packing
Material
Aluminum polyethylene
Paper(-made)
-
Paper
Urethane
Paper
Product
1 model
Storage temperature : 10 to 30℃
Humidity : below 70%RH
Counter measure for
ESD
Conductive type
Non
Non
Non
Non
Non
(contains 1,000 devices per reel).
Quantity
1000pcs. / reel *
16 / 18
Quantity
Refer to 2.2
barcode labels.
Moisture-proof sack
Quantity
1reel / laminated bag
Advertisement
