Panasonic ER-GB37 Service Manual page 5

7. Separate the housing B from the housing A.
8. Loosen 2 screws.
9. Remove the battery from the chassis.
10. Remove the motor.
4.2. Cautions in Assembly
NOTE:
When reassembling, replace the new waterproof rubber.
Make sure whether there is NO foreign substance sticking
around a part covered with water seal.
NOTE:
Make sure to assemble the battery last in order to avoid
short-circuit.
4.2.1. Motor
Place the red mark on upper side. Fit the shape of motor bal-
ancer and the hole of housing A and insert into housing A.
4.2.2. Battery case
Align the projection of switch select button on housing A with
the groove of switch plate on battery case.
NOTE:
Make sure to assemble the washer and O-ring into the bat-
tery and lever.
5
ER-GB37