Specifications - Kenwood TS-130S Service Manual

TS:-1308V
[GENERAL]
Frequency Range:
Mode:
SPECIFICATIONS |
80 meter band 3.5 ~ 4.0 MHz
40 meter band 7.0~ 7.3MHz
*30 meter band
20 meter band 14.0 ~ 14.35 MHz
*17 meterband 18.068 ~ 18.168 MHz
15 meterband 21.0 ~ 21.45 MHz
*12meter band 24.89 ~ 24.99 MHz
10 meter band 28.0 ~ 29.7 MHz
SSB/CW
Power Requirement:
Dimensions:
Weight:
10.1 ~ 10.15 MHz (10.0 MHz Receiving only)
TS-1308
TS-130V
RX: 0.7A 13.8V DC
TX: 118A 13.8V DC
RX: 0O.7A 13.8V DC
TX: 4A 13.8V DC
TS-130S
TS-130V
241 (9.6) W x 94 (3.8) H x
293 (11.7) D mm (inch)
241 (9.6) W x 94 (3.8) H x
235 (9.4) D mm (inch)
[TRANSMITTER]
Final Power
TS-130S TS-130V
5.6 kg (12.4 Ibs) 4.9 kg (10.8 Ibs)
Input:
TS-130S TS-130V
80 — 15 meter band
200 W PEP for SSB operation
160 W DC for CW operation
10 meter band
160 W. PEP for SSB operation
140 W DC for CW operation
25W PEP for SSB operation
20W DC for CW operation
25W PEP for SSB operation
2OW DC for CW operation
Audio Input Impedance:
RF Output Impedance:
Frequency Stability:
Carrier Suppression:
Sideband Suppression:
Spurious Radiation:
Harmonic Radiation:
[RECEIVER]
Receiver Sensitivity:
Image Ratio:
IF Rejection:
Receiver Selectivity:
SSB/CW WIDE
SSB NARROW
CW NARROW
Audio Output Impedance:
Audio Output:
5002. ~ 50 kQ
502
Within +1 kHz during the first hour after 1 minute of warmup
Within 100 Hz during any 30-minute period after warmup
Better than 40 dB
Better than 50 dB
Better than 40 dB
Better than 40 dB
0.25uV at 10dB S+N/N
Better than 50 dB
Better than 70 dB
2.4 kHz (—6 dB), 4.2 kHz (— 60 dB)
1.8 kHz (—6 dB), 3.3 kHz (— 60 dB) with optional YK-88SN filter
500 Hz (—6 dB), 1.5 kHz (— 60 dB) with optional YK-88C filter
270 Hz (—6 dB), 1.1 kHz (— 60 dB) with optional YK-88CN filter
4~ 162
1.5 W
NOTE: Circuit and ratings may change without notice due to developments in technology.
* Will transmit on the new 30, 17, and 12 meter bands. Diodes installed for preventing accidental transmission be-
fore government amateur authorization.