Advertisement
A-711/711L
Operation of remote control unit
Cassette
deck
B
operation
keys
Numeric
keys for CD
player/TUNER
operations
Graphic equalizer
operation keys
INPUT
select keys
SURROUND key,
@ Loading batteries
Sie
eee
ae
1
Remove the cover.:
'TUNER operation keys
Cassette
deck A
operation
keys
CD
player operation
keys
MUTE
key
SUPER WOOFER key
Insert two
AA-size
(R6/
MASTER VOLUME
SUM-3)} batteries as indicated
up/down keys
by the polarity marking.
i=)
@
ea
Gian CHG
EDT IMLAY MODE
Fired lend. Soe C3} [od
{men
KENWOOD
RC-745
N.B. CIRCUIT
up/down
keys
Model:
RC-711
infrared system
"@ Operation procedure
Plug the power cord of the system into an AC wet outlet,
oO
Remote conttal light sensor
and press the POWER
key on the remote control unit to turn
on the main system
the power
on,
(amplifier)
When
the power is turned on, press the key of the source
component
to be operated.
Remote control unit
@
When two operation keys on the remote control unit are pressed
successively, press each key securely reserving an interval of more
Operating range
than 1 second for each press.
Notes:
1.
2.
3.
The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
When the remote-controilable distance gets shorter than before, replace both batteries with new ones.
Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor. In
such a case, change the system installation position to prevent the maifunction.
DISASSEMBLY FOR REPAIR
How to remove the chassis of bottom board
1. Detach the radiator cover by removing the three screws
(@) from the cover of rear side. {It is used for check and
so on of power transistor)
2. Remove seven screws (@) of chassis of added bottom
board.
:
3. Remove four screws (@) of the transformer.
4. Remove the chassis of bottom board from the right side of
-
front panel by paying attention not to hook it with surround
terminals. (@)
A-711/711L
Advertisement
