Table of Contents
Advertisement
6
<Connecting with the RAID controller>
Prepare one K410-174(00) cable (option).
-SAS/SATA cable
Connect the SAS/SATA connector (MINISAS_1) of the 3.5-inch disk cage and the connector on the right
side of the RAID controller mounted on the motherboard.
The port numbers of the server or the RAID controller are pre-assigned according to the physical
location of disk in the cage.
Before connecting the SAS cable to the server or RAID controller, make sure the mating connector of
which number matches the port number. Incorrect connection may cause a failure. For port numbers
Notice
of the server or the RAID controller, refer to the User's Guide of the server.
Advertisement
Table of Contents
