Think Safety First - Toro 30487N Operator's Manual

2. Lower the roll bar to the down position
1. Pin
2. Roll bar
3. Install the 2 pins and secure them with the hairpin
cotter pins (Figure
Important: Ensure that the rear part of the seat is
secured with the seat latch.
4. To raise the roll bar, remove the hairpin cotter pins and
remove the 2 pins
5. Raise the roll bar to the upright position and install the
two pins and secure them with the hairpin cotter pins
(Figure 10).
Important: Always use the seat belt when the roll bar
is in the raised and locked position. Do not use the seat
belt when the roll bar is in the lowered position.
(Figure
Figure 11
3. Mounting hole
10).
(Figure 10).

Think Safety First

11).
Please read all safety instructions and symbols in the safety
section. Knowing this information could help you or
bystanders avoid injury.
DANGER
Operating on wet grass or steep slopes can cause
sliding and loss of control.
Wheels dropping over edges can cause rollovers,
which may result in serious injury, death or
drowning.
There is no rollover protection when the roll bar is
down.
Always keep the roll bar in the raised and locked
position and use the seat belt.
Read and follow the rollover protection instructions
and warnings.
To avoid loss of control and possibility of rollover:
• Do not operate near drop-offs or near water.
• Reduce speed and use extreme caution on
slopes.
• Avoid sudden turns or rapid speed changes.
1. Safe Zone
2. Use walk behind mower
and/or hand trimmer near
drop-offs and water.
CAUTION
This machine produces sound levels in excess of
85 dBA at the operators ear and can cause hearing
loss through extended periods of exposure.
Wear hearing protection when operating this
machine.
22
Figure 12
3. Water