Maintenance; Recommended Maintenance Schedule(S) - Toro 30487N Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 10 hours
After the first 50 hours
After the first 200 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 400 hours
Every 800 hours
Every 1,500 hours
Every 2 years
Important: Refer to your Engine Operator's Manual for additional maintenance procedures. A detailed Service
Manual is also available for purchase from your Authorized Toro Distributor.
Maintenance Procedure
• Torque the frame mounting bolts.
• Torque wheel lug nuts.
• Change the mower deck gear box lubricant.
• Change the engine oil and filter.
• Change the hydraulic oil and filter.
• Test the safety system.
• Check the engine oil level.
• Check the engine coolant level.
• Clean the radiator with compressed air (do not use water).
• Check the hydraulic fluid level.
• Clean the mower deck.
• Grease the bearing and bushing grease fittings.
• Check battery cable connections.
• Check the tire pressure.
• Check the alternator belt tension.
• Check the lubricant in the mower deck gear box.
• Change the engine oil and filter.
• Inspect cooling system hoses and seals. Replace them if cracked or torn.
• Torque wheel lug nuts.
• Change the mower deck gear box lubricant.
• Service the air cleaner.
• Replace the fuel filter canister for the water separator.
• Drain water or other contaminants from the water separator.
• Check the fuel lines and connections.
• Change the hydraulic oil and filter.
• Inspect engine valve clearance. Refer to your Engine Operator's Manual.
• Replace moving hoses.
• Drain and clean the fuel tank.
• Flush and replace cooling system fluid.
34